8x gigabit Ethernet RJ45 ports with AutoUplink™ , 1x console port, and 2x gigabit SFP slots.
Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.
Support spanning tree STP(802.1D) and RSTP(802.1W).
Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
Overview
LNK-M1082GP series managed PoE switch comes with 8x 10/100/1000Base-T RJ45 Ethernet ports, 1x console port, and 2x Gigabit SFP slots. It can supply power to network equipment such as weather-proof IP cameras with windshield wiper and heater, high-performance AP and IP telephone. This managed PoE switch are highly flexible, the transmission distance of the SFP fiber port can be up to 120km, and with high resistance to electromagnetic interference.LNK-M1082GP series product components were rigorous screened, have superior performance in stability, environmental adaptability. Metal shells have better resistance ability to corrosion and electromagnetic interference, ensure stability and security of this Ethernet Switch. Power input also chooses a suitable and reliable types of power, to get more powerful suitability to environment.
Features:
►All Gigabit design, 8x gigabit Ethernet RJ45 ports with AutoUplink™ , 1x console port, and 2x gigabit SFP slots.
►8 PoE ports support power over Ethernet for PDs
►Meet IEEE 802.3af/at PoE standard. Supports per port PoE configuration function
►L2+ features provide better manageability, security, QoS, and performance.
►Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.
►Support spanning tree STP(802.1D) and RSTP(802.1W).
►Jumbo frames support up to 9.6K kilobtyes.
►Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
►Support cable diagnosis
►G.8032, support <50ms industrial quick ring protection
Application:
Technical Specification
Product Name |
8-Port 10/100/1000Base-T + 2x Gigabit SFP slots Managed POE Switch |
Product Model |
LNK-M1082GP Series |
Connector Type |
8x 10/100/1000Base-T ports + 2x Gigabit SFP slots + 1 Console port |
Network Media |
10BASE-T: Cat3/ 4/ 5 UTP (≤100m) 100BASE-TX: Cat5 or more UTP (≤100m) 1000BASE-TX: Cat5 or more UTP (≤100m) |
Buffer Memory |
4M |
Packet Forwarding Rate |
14.88M pps |
Bandwidth |
192Gbps |
Layer 2 Switching |
|
Spanning Tree Protocol (STP) |
Standard Spanning Tree 802.1d Rapid Spanning Tree (RSTP) 802.1w |
G.8032 ERPS |
<50ms ring protection for industrial high reliable application |
Aggregation |
Link Aggregation Control Protocol (LACP) IEEE 802.3ad Up to 13 groups Up to 16 ports per group |
VLAN |
Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) Port-based VLAN 802.1Q tag-based VLAN |
DHCP Snooping (Layer 2) |
Prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection |
IGMP v1/v2 snooping |
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting is not supported) |
Security |
|
Secure Shell (SSH) Protocol |
SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported |
Secure Sockets Layer (SSL), HTTPS |
SSL encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch |
Port Security |
Locks MAC Addresses to ports, and limits the number of learned MAC addresses |
IP Source Guard |
Prevents datagram with spoofed addresses from being in the network |
Storm control |
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
ACLs |
Support for up to 256 entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag |
Quality of Service |
|
Hardware |
Support 8 hardware queues |
Scheduling |
8 COS queues per port support strict priority and weighted round-robin (WRR) |
Classification |
Port based; 802.1p(PCP) VLAN priority based; |
Rate Limiting |
Ingress policer;egress shaping and rate control;per VLAN,per port and flow based |
Management (Web/ SSL, Telnet/ SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog) |
|
Web GUI interface |
Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring |
Dual Image |
Dual image provides independent primary and secondary OS files for backup while upgrading |
Firmware upgrade |
Web browser upgrade (HTTP/ HTTPs) and TFTP;nUpgrade through console port as well |
Port mirroring |
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. |
Other management |
Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support) |
Green Ethernet |
|
Link detection |
Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up |
Cable length detection |
Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter. |
General |
|
Jumbo frames |
Frame sizes up to 9KB supported on Gigabit interfaces |
MAC Table |
Up to 8K MAC addresses. |
Discovery |
|
Link Layer Discovery Protocol (LLDP) |
Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet. |
PoE |
|
PoE Standard: |
PoE Port Power:30W per PoE port by default, can be customized by Web management software |
PoE Ports: |
PoE Ports: End-span (Mid-span optional) |
Minimum Requirements |
Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later; Category 5 Ethernet network cable; TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network |
Dimensions |
279*210*44mm |
Working Environment |
Operating temperature: -20 to 55 ℃; Storage temperature: -40℃ to 85 ℃; Operating humidity: 10% to 90% , relative, non-condensing |
Warranty |
2 years warranty |
Order information
Model |
Description |
LNK-M1082GPF |
Managed 8G + 2SFP Ethernet PoE Switch: 10/100/1000Mbps POE port (8ports) + 1000Mbps SFP (the 9,10th) + 1 console port, not including SFP Modules; Support IEEE 802.3af Standard(15.4W) and IEEE 802.3at Standard(30W), Built-in Power Supply AC220V 130W, support WEB Management |
LNK-M1082GPT |
Managed 8G + 2SFP Ethernet PoE Switch: 10/100/1000Mbps POE port (8ports) + 1000Mbps SFP (the 9,10th) + 1 console port, not including SFP Modules; Support IEEE 802.3af Standard(15.4W) and IEEE 802.3at Standard(30W), Built-in Power Supply AC220V 240W, support WEB Management |