- 产品中心
-
Fiber To Ethernet Switches
-
SFP Transceivers
-
HD Video over Fiber Converter
-
Other Accessories
-
- 解决方案
- 新闻中心
- 关于易联
- 联系我们
Fiber To Ethernet SwitchesSFP TransceiversHD Video over Fiber ConverterOther Accessories
V.35 Fiber Optic Modem
型号：LNK-2707
►Providing one V.35 port, with the rate of N × 64 Kb/s (N = 1-32), adjustable；
►Providing three timing modes: mater timing, tracing V.35 port, and tracing optical port；
►Providing auto-sensation between the receive clock and data phase at V.35 port；
►Supporting automatic tracing function of remote timeslot bandwidth
V.35 fiber optic Modem is a kind of communication equipment to transmit one channel of V.35 data over a
pair of fibers. It uses ASIC chip, adopts modular structure inside, integrates the functions of coding,
decoding, information insertion, and alarm switchover,. Therefore its circuit is simple, structure is compact
and power consumption is low. It is widely used in the occasions that require high reliability and complete
auxiliary functions.
►Providing one optical port, supporting point-to-point connection in pairs or connection to E1 fiber
optic Modem;
►Providing one V.35 port, with the rate of N × 64 Kb/s (N = 1-32), adjustable
►Providing three timing modes: mater timing, tracing V.35 port, and tracing optical port
►Supporting automatic tracing function of remote timeslot bandwidth
►Providing auto-sensation between the receive clock and data phase at V.35 port
►Supporting multiple loopback functions and bit error of internal link test function, facilitating
engineering commissioning
►Providing the remote electrical outage detection function, which can tell whether it is fiber cut or the
remote electrical outage
►Rich panel display enables the user easy to identify the fault
Application
Technical Parameters
|
Optical Interface Index |
||
|
Optical link rate |
4.096 Mb/s |
|
|
Wavelength |
1310 nm (default) / 1550 nm (optional) |
|
|
Transmission distance |
40 km (default) / 60 km, 80 km, 120 km (optional) |
|
|
Optical output power |
> -12 dBm |
|
|
Receiving sensitivity |
superior to – 36 dBm (BER ≤ 10-10) |
|
|
Optical connector |
FC (default)/SC (optional) |
|
|
Optical fiber |
dual-fiber (default) / single fiber (optional) |
|
|
V.35 Interface Index |
||
|
Rate |
N x 64 Kb/s (N = 1-32) |
|
|
Interface characteristics |
compliant with V.35 standard |
|
|
Connector |
DB25 socket Working in DTE or DCE mode (set by selecting the clock of equipment) auto-sensation between the receive clock and data phase Phase of output data can be selected through the DIP switch RXC_MOD |
|
|
Interface level |
Data and clock signals are differential signals, V.35 or V.11 level optional, and V.35 level by default Control signal is non-balanced signal, with electrical characteristics of V.28 |
|
|
Note: The selection of electrical characteristics V.35 level and V.11 level of data and clock signals are made by the jumper J19 (beside SP322) inside the equipment. The default value is V.35 level. If it is required to set to V.11 level, please open the chassis and make selection by yourself. Please do not change the default positions of other jumpers. |
||
|
Power Index |
||
|
Power supply |
AC 220V (175V – 265V); or DC -48V (-36V – -72V) |
|
|
Power consumption |
< 5W |
|
|
Model |
Description |
|
LNK-2707 |
V.35 Fiber Optic Modem, V.35 Rate (Nx64K), DTE or DCE Mode, Single Mode Fiber, 20KM, FC Fiber Connector, AC220V or DC-48V |
