Overview

LNK-24F2G high-performance smart Layer 2 optical Ethernet switch provides an ideal solution for fiber-to-the-home (FTTH) and fiber-to-the-desk (FTTD), and for the applications where the environmental conditions exceed the reach of CAT5 copper cable. It offers 24 100Base-FX ports, and 2 10/100/1000Base-TX or optional SFP 1000Base-X ports for flexibility and fast connection speeds.

Features

►Non-blocking store-and-forward shared-memory architecture with an 8.8Gbps switching capacity and an efficient self-learning and address recognition mechanism enables the forwarding rate to proceed at a full wire speed.

►6K address table for auto-learned unicast or static unicast/multicast addresses

►7 trunk groups of up to 4 member ports within 26 ports with flexible load distribution control and fail-over function

►Static priority and 802.1p Class of Service with 2-level priority.

►802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode

►Port-based VLAN and 802.1Q tag-based VLAN with 255 VLAN groups.

►Head of Line (HOL) blocking prevention

►By-port Egress/Ingress bandwidth management control

►Broadcast storm filtering

►1-Year Warranty

Application

LNK-24F2G high-performance smart Layer 2 optical Ethernet switch provides an ideal solution for fiber-to-the-home (FTTH) and fiber-to-the-desk (FTTD), and for the applications where the environmental conditions exceed the reach of CAT5 copper cable.

Technical Indexes

Network Management (Optional)

Out of Band: RS-232 Console

Support CLI: console and telnet(SSH) access

Support SNMP MIB II

Support SNMP trap event

Support SNMP v1, SNMP v2, SNMP v3

Support Web-management

Support Remote Syslog

Support self-diagnostic

Network Protocol and Standards

IEEE:

802.3, 802.3u, 802.3z, 802.3ab, 802.1p, 802.1q, 802.3ad, 802.3x

Port Configuration

Gigabit ports:  two 10/100/1000Base-TX RJ45 ports or two optional SFP 1000Base-X LC pors

Twenty-four 100Base-FX SC/PC ports 

Optical Interface Options

1000Base-X 

Dual multimode fiber (50/125μm), single wavelength 850nm, 

dual LC connectors, operating distance 550m.

Dual multimode fiber (62.5/125μm), single wavelength 850nm,

dual LC connectors, operating distance 275m.

Dual single-mode fiber, single wavelength 1310nm or 1550nm, 

dual LC connectors, operating distance 15/40km.

100Base-FX

Single single-mode fiber, dual wavelength 1550nm/1310nm, 

SC/PC connector, operating distance 20/40km.

Dual single-mode fiber, single wavelength 1310nm or 1550nm, 

dual SC connectors, operating distance 20/40/60km.

Dual multimode fiber, single wavelength 1310nm, 

dual SC connectors, operating distance 2km.

Power Supply Options

AC90~264V/1.2A max, 50/60Hz,

Power Consumption: <35W

Physical and Environmental 

Dimensions: 19-inch rack-mount width, 1.0U height.

Weight: 3Kg

Operating temperature: -20℃ ~ 65℃

Storage temperature: -25℃ ~ 85℃

Humidity: 5% ~ 95% RH Non-condensing.

• 下载 文件名：E-link 24-port 100Base-FX SC ports and 2 Gigabit Fiber Switch Datasheet V1.0.pdf 文件大小： 451KB

Ordering Information