- 产品中心
-
Fiber To Ethernet Switches
-
SFP Transceivers
-
HD Video over Fiber Converter
-
Other Accessories
-
- 解决方案
- 新闻中心
- 关于易联
- 联系我们
Fiber To Ethernet SwitchesSFP TransceiversHD Video over Fiber ConverterOther Accessories
L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 2-Port 10G SFP+ Fiber Switch
型号：LNK-FS48G6C4X
LNK-FS48G6C4X Series 48-Port SFP Fiber Switch are standard layer 3 non-blocking switch with 48-Port Gigabit SFP, 6-Port Combo Ethernet and 4-Port extensible 10G SFP+, based on high-performance ASIC chip technology, the modular structure design , which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C4X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Overview
LNK-FS48G6C4X Series 48-Port SFP Fiber Switch are standard layer 3 non-blocking switch with 48-Port Gigabit SFP, 6-Port Combo Ethernet and 4-Port extensible 10G SFP+, based on high-performance ASIC chip technology, the modular structure design , which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C4X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Features
►High performance
►with 280G backplane bandwidth
►hardware routing, wire-speed L3 switching packet forwarding rate up to 208.32Mpps
►can be deployed in the core of MAN, and provides several final 1 km technology
►Safety
►provide DOS, distributed denial of service, deception and virus defense
►support IEEE802.1x, provide port-based user authentication, network shield, safety control, and strategy control technology
►restrict maximum number of connected hosts port, with multi-channel Ethernet interface binding, increasing bandwidth and system redundancy
►powerful ACL, support for L2-L4 layer data filtering
►support QinQ function
►strategy control list, flow regulation
►Easy to use and maintain
►use clustering technology, support multiple device stack, with a unified IP address to carry on centralized management to save address resources
►a variety ways of management via Web, SNMP etc.
►support XModem protocol, can be used to upgrade software and BootRom by TFTP/ZMODEM
►support DHCP server and relay functions, dynamic allocation of IP address
►support SFP+, also downward compatible XFP
►provide redundant power supply, fast failover and fast connection, greatly increasing system reliability
►Powerful flow and broadcast management
►automatically detect and suppress broadcast storm, support for IGMP packet detection, effectively restrict broadcast packets flooding
►support full duplex mode and half duplex mode flow control
►support Ethernet interface 1M step rate limit
►advanced buffer management, support 802.1p protocol, each port 8 transmit queues mapping 8 priority of 802.1p
►support IP multicast and QoS
►Different kinds of routing strategy
►support static routing
►support RIP v1/v2, OSPFv2, BGPv4 and other dynamic routing protocol
►support PIM-SM, PIM-DM, DVMRP and other multicast routing protocol
►MPLS-based exchange routing and ECMP-supported routing balanced loading.
Application
Technical Indexes
|
Product Type |
L3 Managed 48G SFP+6GE Combo+4x10G SFP Fiber Switch |
|
Fixed port |
48-Port Gigabit SFP Fiber Port + 6-Port Combo TP + 4-Port SFP+ |
|
Backplane bandwidth |
176Gbps |
|
Packet forwarding rate |
130.94Mpps |
|
Processor |
RISC 600MHz |
|
Flash memory capacity |
8MB |
|
The memory capacity |
128MB |
|
Address table |
32K |
|
Product characteristics |
|
|
Spanning tree |
Support STP, RSTP, MSTP Support PVST/PVST+ |
|
VLAN |
Support port-based VLAN |
|
Support MAC based VLAN |
|
|
Support 802.1Q tag VLAN |
|
|
Support Super VLAN |
|
|
Support for Private VLAN |
|
|
Support GVRP Dynamic VLAN Configuration |
|
|
Support QinQ and Smart QinQ |
|
|
Support Voice VLAN |
|
|
Flow control |
Based on a standard IEEE 802.3x flow control |
|
Using IEEE 802.1Qbb priority flow control |
|
|
Support CAR Function |
|
|
Broadcast control |
Restraining broadcast storm, stop sending so long as reaching a critical point |
|
Multicast control |
IGMP Snooping multicast message automatic monitoring |
|
Port binding |
Each group of a maximum of 8, while support 32 group |
|
Port mirroring |
Support based on flow classification mirroring and port mirroring |
|
Stacked |
Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
|
Routing management |
Static routing |
|
Strategy routing |
Support based on IP strategy routing |
|
The proxy function |
Support Proxy ARP, DNS Proxy |
|
Redundancy backup |
Support for VRRP, HSRP Hot Standby Router Protocol |
|
Characteristics of DHCP |
DHCP Server, DHCP Client and support DHCP relay |
|
Function of NAT |
Support the static or dynamic NAT address translation function |
|
Safety characteristics |
Port Security (Port Security) function
Hardware support for IP ACL, MAC ACL, Vlan ACL
User classification management and password protection |
|
Quality of service |
IEEE 802.1Qau congestion mechanism |
|
Network management |
SNMP v1/v2/v3 |
|
Physical characteristics |
|
|
Appearance size |
442mm × 285mm × 44mm |
|
Power characteristic |
AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
|
Power |
80W |
|
Indicator lamp |
Power indicator, indication of system, connecting / transceiver instructions |
|
Environment |
Operating Temperature: 0-50 ℃ Relative Humidity: 0-90% no condensation |
- 下载 文件名：E-link L3 Managed 48G SFP+6GE Combo+4x10G SFP Fiber Switch Datasheet V1.0.pdf 文件大小： 490KB
Ordering Information
|
Model |
Description |
|
LNK-FS48G6C4X |
L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch |
