Overview
LNK-POE1000SFP series is a 10/100/1000Base-TX to 1000Base-X SFP (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
Features
►10/100/1000Base-TX UTP to 1000Base-X SFP fiber media conversionTechnical Indexes
Data Rates |
10/100/1000Mbps(IEEE802.3U IEEE802.3z 1000Base-Tx) |
1000Mbps (1000Base-FX) or 100Mbps (100Base-FX) |
|
Input Power Requirements |
|
Input voltage |
100 VAC to 240 VAC or 48DC |
Input frequency |
47 Hz to 63 Hz |
Power over Ethernet Output |
|
Pin Assignment and Polarity |
|
For IEEE802.3af standard |
1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (30watts maximum) |
1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (50watts maximum) |
1/2/4/5 (V+),3/6/7/8 (V-) |
Output Power |
please refer to ordering information |
Efficiency |
75% min |
Short circuit protection |
auto recovery |
Over current protection |
auto recovery |
Environmental Conditions |
|
Operating temperature |
-20℃ to 70℃ |
Cooling |
free air convection |
Storage temperature |
-40℃ to +85℃ |
Operating Humidity |
90% max, non-condensing |
Mechanical Specifications |
|
Case Material |
Iron |
Case Color |
Black |
Net Weight |
560g approx. / unit |
Dimensions |
110(W) x 40(H) x 140(L) (mm) |
Do not include transceiver length |
|
Connectors |
|
AC Inlet |
IEC-J-4 |
LAN |
Shielded RJ-45 |
Fiber |
see ordering information |
Ordering Information:
Part
Number
Supported
Standard
Output
Voltage
Output
Current
Output
Power
Remark
LNK-POE1000SFP-AF
IEEE
802.3af
48V
0.35A
max
15.4W
max
default
LNK-POE1000SFP-AT
IEEE
802.3at
48V
0.54A
max
25W
max
default