- 产品中心
-
网络通信
-
SFP Transceivers
-
HD Video over Fiber Converter
-
Other Accessories
-
- 解决方案
- 新闻中心
- 关于易联
- 联系我们
网络通信SFP TransceiversHD Video over Fiber ConverterOther Accessories
155M 100Mbps Copper SFP Transceiver
型号：LNK-SFP-100-T
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by E-LINK before they become applicable to any particular order or contract. In accordance with the E-LINK policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of E-LINK or others. Further details are available from any E-LINK sales representative.
E-link`s LNK-SFP-100-T Copper Small Form Pluggable (SFP) transceiver module is specifically designed for converting 100Base-FX NRZI port interface to 10/100Base-TX interface with RJ45 connector. The transceiver module is compliant with the SFP MultiSource Agreement (MSA) and IEEE802.3u. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.
Features
►Hot-pluggable SFP footprint
►Extended case temperature range (0°C to +70°C )
►Fully metallic enclosure for low EMI
►Compact RJ-45 connector assembly
►It supports RX_LOS(Loss of Signal) function
►Compatible with IEEE802.3u
►Access to physical layer IC via 2-wire serial bus
►A 10/100BASE-TX/ 100BASE-FX converter
Applications
This 100Base-TX Copper SFP Transceiver supports the SFP based switch100Base-FX ports that accept standard 100Base-FX optics SFP.
Pin Descriptions
|
Pin |
Signal Name |
Description |
Plug Seq. |
Notes |
|
1 |
VEET |
Transmitter Ground |
1 |
|
|
2 |
TX FAULT |
Transmitter Fault Indication |
3 |
Note1 |
|
3 |
TX DISABLE |
Transmitter Disable |
3 |
Note2 |
|
4 |
MOD_DEF(2) |
SDA Serial Data Signal |
3 |
Note3 |
|
5 |
MOD_DEF(1) |
SCL Serial Clock Signal |
3 |
Note3 |
|
6 |
MOD_DEF(0) |
TTL Low |
3 |
Note3 |
|
7 |
Rate Select |
Not Connected |
3 |
|
|
8 |
LOS |
Loss of Signal |
3 |
Note 4 |
|
9 |
VEER |
Receiver ground |
1 |
|
|
10 |
VEER |
Receiver ground |
1 |
|
|
11 |
VEER |
Receiver ground |
1 |
|
|
12 |
RX- |
Inv. Received Data Out |
3 |
Note 5 |
|
13 |
RX+ |
Received Data Out |
3 |
Note 5 |
|
14 |
VEER |
Receiver ground |
1 |
|
|
15 |
VCCR |
Receiver Power Supply |
2 |
|
|
16 |
VCCT |
Transmitter Power Supply |
2 |
|
|
17 |
VEET |
Transmitter Ground |
1 |
|
|
18 |
TX+ |
Transmit Data In |
3 |
Note 6 |
|
19 |
TX- |
Inv. Transmit Data In |
3 |
Note 6 |
|
20 |
VEET |
Transmitter Ground |
1 |
|
Notes:
- 下载 文件名：E-link 100Base-T SFP Transceiver Datasheet V1.0.pdf 文件大小： 176KB
Ordering information
|
Part number |
Operating Case temperature |
|
LNK-SFP-1100-T |
10/100Mbps, Copper SFP with spring latch |
|
LNK-SFP-100-T |
100Mbps only, Copper SFP with spring latch |
