►Store and Forward mechanism;
►Event trap and SNMP trap support;
►Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN;
►TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test;
Overview
LNK-103OAM-SFP series supports 10/100/1000M Ethernet Port and 1000M SFP Port. The 10/100/1000M IEEE802.3ah OAM manageable Ethernet Fiber Media Converter can supervise the real time situation of remote manageable fiber media converter and set the functions. With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure of the operators are reduced, and the serving quality of them is enhanced.Features
►Built-in IP-based Web Interface
►Supporting remote and local management
►Support IEEEE 802.3X Frame Flow Control for Full-Duplex mode
►Store and Forward mechanism
►Manual IP address setting/DHCP client for IP address assignment
►SNMP v1 / v2c monitor / private Enterprise MIB
►Event trap and SNMP trap support
►Speed duplex mode configuration / Flow Control setting / bandwidth Control on TP / Fiber port
►Supports Port Status / Ethernet Statistics on both TP and Fiber intertace
►Supports Maximum frame size to 16K bytes
►Loop detection / Broadcast / Multicast / Unicast storm control
►Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
►802.1p Tag Priority / IP address priority / IP DSCP option in
►Quality of Service Mode and Strict Priority / Weighted Round Robin (WRR) QoS policies
►TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
►16 TCP / UDP Filter groups
►Password setting, IP setting and devices description setting through Planet Smart discovery utility
►Firmware upgrade via remote Web interface
►LED indicators for easy network diagnosing
►Reset Button at the front panel for the factory default reset
►SFP port: 1000Base-FX/LX/BX mini GBIC module
Technical Indexes
Standards &Protocols |
IEEE802.3x full duplex on 10BaseT, 100BaseTX,1000BaseT IEEE802.3-2002 |
IEEE802.3u 100BaseTX, IEEE802.3ah-2004 |
|
IEEE 802.1d Spanning Tree |
|
IEEE 802.1w |
|
IEEE 802.1p Qos |
|
IEEE 802.1q VALN TAG IEEE802.3X Flow control |
|
Connector |
SFP |
Operating wavelength |
850nm, 1310nm at Multi-mode; 1310nm, 1550nm at single mode |
Optical fibers |
Multi-mode: 50/125,62.5/125,100/140um; |
Management port |
1 console (RJ45) |
Serial port configuration |
9600bps/8bit/none parity/1 stop bit/none low control |
User port |
10/100/1000BaseTX (RJ45), Full/Half duplex; |
1000Base-FX (SFP module) |
|
Fiber link option |
Dual fiber/single fiber (WDM) |
Max frame size |
1518 Bytes (100M);9728 Bytes (1000M) |
Transmission distance |
Depending on SFP module type |
Band width management |
Support bandwidth control by step of64Kbps (N*64K) |
LLCF |
Support Link loss carry forward (LLCF) |
Q-in-Q |
Q-in-Q functionality(addanotherouter9100tag)makes the customer packets tunneled and unmodified through the providers network by using a provider configured 802.1QVLANtags,alleviating the burden of aggregation switch |
IEEE802.3ah OAM |
LNK-103OAM-SFP Series series has two working modes: Master and Slave. Central Office device works at Master mode, and Customer Premise device at Slave mode. The OAM functions are originated by Master device. |
Link monitoring |
Report local events to remote device, including Critical Event (voltage and temperature abnormal) and Dying Gasp (power down). |
OAM discovery |
Check if remote device has implemented/enabled IEEE802.3ah OAM function, and negotiate with remote device |
Working Temperature |
0℃~60℃ |
Working Humidity |
5%~90%(non-condensing) |
Storage Temperature |
-10℃~70℃ |
Storage Humidity |
RH: 5~90% non-condensing |
Power supply |
85VAC~265VAC or -40VDC~-57VDC |
Power consumption |
≤5W |
Model |
Description |
LNK-103OAM-SFP |
10/100/1000M One TO One Manageable Media Converter, IEEE802.3ah OAM compliant, Internal Power Supply: AC220V, 1-port UTP and 1-port SFP |