- 产品中心
-
Fiber To Ethernet Switches
-
SFP Transceivers
-
HD Video over Fiber Converter
-
Other Accessories
-
- 解决方案
- 新闻中心
- 关于易联
- 联系我们
Fiber To Ethernet SwitchesSFP TransceiversHD Video over Fiber ConverterOther Accessories
10GBASE-SR SC DDM 10 Gigabit XENPAK Transceiver
型号：LNK-XENPAK-10G
Performance figures, data and any illustrative material provided in this data sheet are typical and must be
specifically confirmed in writing by E-LINK before they become applicable to any particular order or contract. In accordance with the E-LINK policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of E-LINK or others. Further details are available from any E-LINK sales representative.
1) Ground connections are common for TX and RX.
2) All connector contacts are rated at 0.5A nominal.
3) 1.2V CMOS compatible.
4) MDIO and MDC timing must comply with IEEE802.3ae, Clause 45.3
5) XAUI output characteristics should comply with IEEE802.3ae Clause 47.
6) Transceivers will be MSA compliant when no signals are present on the vendor specific pins.
Features
►Compatible with XENPAK MSA
►Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps
►SC Duplex Optical Connector
►Hot Pluggable 70-PIN Connector with XAUI Electrical Interface
►Management and control via MDIO 2-wire interface
►Power Supply :+3.3V, APS(+1.2V)
►Diagnostic Optics Monitoring
►Temperature Range: 0~ 70 °C
►ROHS6 Compatible
Applications
10GE Ethernet switches and routers
10GE Core-routers
10GE Storage
Other 10Gbps Ethernet Transmission System
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
Ref. |
|
Storage Ambient Temperature Range |
|
-40 |
+85 |
°C |
non condensing |
|
Powered case Temperature Range |
|
0 |
+70 |
°C |
non condensing |
|
Adaptable Power Supply (APS) |
Vapsense |
0 |
1.5 |
V |
Voltage @ Pin APS Sense |
|
Supply Voltage Range @ 3.3V |
Vcc3 |
-0.5 |
4.0 |
V |
|
Any stress beyond the maximum ratings can result in permanent damage. The device specifications are guaranteed only under the recommended operating conditions.
Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
|
Operating Case Temperature |
Tc |
0 |
|
+70 |
°C |
|
|
Power Supply Voltage |
|
VCC3 |
3.14 |
3.3 |
3.47 |
V |
|
|
VAPS |
1.152 |
1.2 |
1.248 |
||
|
Power Dissipation |
PD |
|
1.7 |
2.4 |
W |
|
Order Information
| LNK-XENPAK-10G-SR | XENPAK, 10GBASE-SR, SC, 850nm, multimode fiber (MMF OM3), Up to 300m, With Digital Diagnostic Monitoring, 0°C~+70°C |
| LNK-XENPAK-10G-LR | XENPAK, 10GBASE-LR, SC, 1310nm, supports a link length of 10kilometers on standard single-mode fiber, With Digital Diagnostic Monitoring, 0°C~+70°C |
