- 产品中心
-
Fiber To Ethernet Switches
-
SFP Transceivers
-
HD Video over Fiber Converter
-
Other Accessories
-
- 解决方案
- 新闻中心
- 关于易联
- 联系我们
Fiber To Ethernet SwitchesSFP TransceiversHD Video over Fiber ConverterOther Accessories
10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter with Built-in Power Supply
型号：LNK-3012-SFP
►1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function；
►1 SFP interface, 100/1000BASE-X dual mode (auto detection)；
►9K jumbo frame size support；
►Built-in Power Supply；
Overview
LNK-3012-SFP is equipped with one 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface with built-in power supply. The media converter fulfills 100/1000M auto-sensation at fiber optic port, which increase the flexibility of the whole network. The SFP slot of the LNK-3012-SFP is compatible with 100BASE-FX and 1000BASE-SX / LX / WDM through SFP fiber-optic transceivers.
Customer can easily migrate from 100M fiber to Gigabit without changing customer premise equipment (CPE). Start using the LNK-3012-SFP in your current 100M infrastructure. When you are ready to move to Gigabit Ethernet, only change the central switch and all the LNK-3012-SFP will automatically adjust to Gigabit speed. This cuts the number of customer visits in half and reduce installation cost with 50%. No need for proprietary equipment, it is compatible with you existing Ethernet products and follows all the accepted standards.
Features
►1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
►1 SFP interface, 100/1000BASE-X dual mode (auto detection)
►IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant
►Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
►Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
►9K jumbo frame size support
►LFP function support
►Supporting low-time lag transmission
►Built-in Power Supply
►Extremely low power consumption (less than 3W), reliable and stable performance
Technical Indexes
|
Hardware Specifications |
|
|
Copper Interface |
1 x 10/100/1000BASE-T RJ45 TP |
|
Auto-MDI/MDI-X, auto-negotiation |
|
|
Fiber Optic Interface |
1 x 1000BASE-SX/LX/BX SFP interface. |
|
Compatible with 100BASE-FX SFP |
|
|
LED |
■ TP: 10M |
|
■ TP: 100M |
|
|
■ TP: 1000M |
|
|
■ FX: 100M |
|
|
■ FX: 1000M |
|
|
■ PWR |
|
|
Dimensions (W x D x H) |
71 x 94 x 26 mm |
|
Weight |
200g |
|
Power Requirements |
AC 100-240V 50/60Hz 0.15A Max |
|
Power Consumption / Dissipation |
<3W |
|
Network Cables |
10/100/1000BASE-T: |
|
Cat3, 4, 5, 5e, 6 UTP cable (100 meters, max.) |
|
|
EIA/TIA-568 100-ohm STP (100 meters, max.) |
|
|
1000BASE-SX: |
|
|
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) |
|
|
1000BASE-LX: |
|
|
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module) |
|
|
100BASE-FX: |
|
|
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to |
|
|
2 kilometers (varying on SFP module) |
|
|
9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (varying on SFP module) |
|
|
Standards Conformance |
|
|
Standards Compliance |
IEEE 802.3 10Base-T |
|
IEEE 802.3u 100Base-TX |
|
|
IEEE 802.3ab 1000Base-T |
|
|
IEEE 802.3z 1000Base-SX/LX |
|
|
IEEE 802.3x Flow Control |
|
|
Regulation Compliance |
CE, RoHS and FCC |
|
Environment |
|
|
Temperature |
Operating: 0~50 degrees C |
|
Storage: -10~70 degrees C |
|
|
Humidity |
Operating: 5~95% (non-condensing) |
|
Storage: 5~95% (non-condensing) |
|
- 下载 文件名：E-link 101001000BASE-T to 1001000BASE-X SFP Media Converter Datasheet V1.0.pdf 文件大小： 286KB
|
Item |
Description |
|
|
|
||
|
LNK-3012-SFP |
10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter with Built-in Power Supply, SFP slot compatible with 100BASE-FX and 1000BASE-X SFP, not including SFP modules |
|
